Grand Cayman Island

On a series of canals near the Ritz-Carlton Grand Cayman’s Blue Tip golf course, and near Seven-Mile Beach in West Bay, Crystal Harbour, is a gated residential community of about 50 luxury homes.

Beyond a circular cobblestone driveway, this four-year-old cream-colored concrete and stucco villa with four-zone air-conditioning and a gray tile roof sits on a 0.48-acre waterfront property. Its $2.795 million asking price does not include the furnishings, although they are negotiable.

The double front door with sidelights opens onto a vaulted two-story foyer with a Turkish marble floor that continues throughout the house. To the right, the formal dining room has French doors leading to the front “cigar patio” enclosed with a balustrade. An office to the left of the foyer opens onto a similar “bistro patio.” Under the staircase to the left, the master suite, with its spalike bath, opens via 12-foot sliding doors to the yard patio, also of Turkish marble.

Sliding doors stretch across the back of the house, linking the patio to the living room, the den and the breakfast room; all have water views. One wall of the living room has a granite-topped wet bar with an ice maker and a wine fridge. Beyond the den, a kitchen has a three-foot-wide Sub-Zero refrigerator and a separate three-foot-wide Sub-Zero freezer. An L-shaped island with a granite countertop houses the main sink on one side and a smaller sink on the other. Frosted glass cabinets above a porcelain plank tile backsplash span the walls. Appliances include a microwave, dual ovens, a Wolf gas cooktop, a pot filler, a KitchenAid dishwasher and a trash compactor.

Off the hallway between the kitchen and the three-car garage is the laundry room; nearby is a guest bath with an outside door for party use.The second floor has the other bedrooms, all but one with en-suite baths, as well as a gym and a den.

The backyard has a multilevel 32-foot infinity pool with built-in tanning beds submerged in three inches of water. There is also a spa for eight, as well as an outdoor kitchen and bar pavilion, and access to the 58-foot-long dock and Jet Ski lift.

An outdoor shower is mounted outside the pool equipment house. In case of a hurricane, a cistern provides 9,000 gallons of emergency water.  Grand Cayman is the largest and liveliest of the three-island archipelago known as the Cayman Islands, a British Overseas Territory in the Western Caribbean.Along Seven-Mile Beach, the market starts at around $300,000, for a condominium, and tops out in the eight figures.

Jeanette Totten, the president of the Cayman Islands Real Estate Brokers Association, said there had been a “slight improvement” in the market this year, with more interest among expatriate second-home buyers. The increase is centered along Seven-Mile Beach, for condominiums, and Cayman Kai on the north side of the island for single-family homes.

According to Kel Thompson, a developer and an owner of Century 21 Cayman, “Prices have softened significantly since 2008, and the rate of sales has decreased.” The market remains “tilted much in favor of buyers,” he said.

Read the full story at aulaundry.com web! Shanghai Xunduo Electric & Machinery Co., Ltd. is one of the leading industrial laundry equipment manufacturers of washer extractor, tumble dryer,flat work ironer, laundry dryer, folding machine, dry cleaning machine ect., which is integrating designing,researching, manufacturing, sales and service all within the company to ensure the highest level of quality and service.

Cobb ready to head

Cobb residents are putting the finishing touches on their superhero costumes in anticipation for the weekend extravaganza known as DragonCon, a multimedia pop culture convention focused on science fiction and fantasy.

DragonCon runs for four days from Aug. 30 to Sept. 2 through five hotels in downtown Atlanta and features thousands of hours of panels, seminars, demonstrations, workshops, costume contests, celebrity guests and a parade for fans of sci-fi, fantasy, video games, comic books and other elements of fan culture.

Among the more than 52,000 in attendance will be cosplayer John Strangeway in his steampunk Boba Fett costume and the Kell High School robotics team as they host a robotics workshop from 11 a.m. to 4 p.m. on Saturday at the Sheraton hotel in the Atlanta room.

Cosplay is an activity in which participants wear costumes and accessories to represent a specific character or idea from a work of fiction. Cosplayers often interact to create a subculture centered on role play. Boba Fett is the villainous bounty hunter hired by Darth Vader from the “Star Wars” franchise. When Strangeway attended his first DragonCon event in 2008, he knew he wanted to develop a costume that was both different and paid homage to his love of “Star Wars.”

“I wanted a unique Boba Fett,” said the Marietta resident. “I’ve always been a ‘Star Wars’ fan and I was like, ‘Well, I wonder what would happen if it was modified.’”

Strangeway works at Crestron, a company in Alpharetta that makes commercial and residential touch screens and keyboards.

In May 2009, Strangeway became interested in the steampunk genre after attending a steampunk conference in Atlanta and making friends with a group of steampunk cosplayers and enthusiasts. Steampunk is an artistic and cultural cosplay movement that merges modern day technology and fantastical fiction with Victorian style.

Strangeway communicated with members of the group via phone and Skype and began trading ideas for steampunk costumes. The Boba Fett costume was created by Whitestone Productions, a company that produces short films where Strangeway was formerly employed. He wore the costume for the first time in 2009 at DragonCon and received widespread cheers.

“The reception was insane. I started a Facebook page … ” the 33-year-old said. “I just go around having fun. I’ve made a lot of friends throughout the community.”

He attends about one or two conventions a month throughout the country and rotates wearing about 10 costumes. Strangeway wears costumes based on characters such as the Jedi knights from “Star Wars,” Beast from “X Men,” a coal miner from the “Silent Hill” video game, the fifth “Doctor Who,” and more. He is currently developing a costume for Sean Connery’s character Juan Sánchez Villa-Lobos Ramírez in “Highlander.”

At DragonCon, Strangeway will be working as a staff member for the Alternate History track, a set of programming and panels catering to steampunk. He’ll also be walking as Boba Fett in the DragonCon parade on Saturday at 10 a.m. in downtown Atlanta.

Costumes are made with the help of artistic friends, area fabric stores, production companies and Strangeway’s wild imagination.

“I find material on websites, thrift stores,” Strangeway said. “I’ve never been to so many fabric stores in my later life. (I go) to Joanns and Hancock’s and Hobby Lobby and Michaels. There’s a Fabric World over by Stone Mountain. … That’s where I got most of the Jedi outfit. The robe is multi-layered and some of it’s made from upholstery.”

Over the years, Strangeway has made a name for himself in the steampunk community. His Steampunk Boba Fett Facebook page has almost 32,000 fans to date. But even after visiting ComicCon in San Diego and various other conventions throughout the U.S., DragonCon is still No. 1 for him.

“It’s my favorite because it’s for the fans,” Strangeway said. “You still get to meet celebrities. But you get to go to panels of any of your interests in the genres of sci-fi/fantasy and they’ve got it there.”

Robot fans and Leomaniacs can get their fix of machine fun at DragonCon as well with a workshop presented by the Kell High School robotics team called Lego FIRST Challenge. The students will direct participants on how to build and program a Lego robot from a kit.

This is the second DragonCon the 10-year-old team has attended, said program director Ed Barker.

Students range from ninth-graders through 12th-graders and also hail from Sprayberry High and other Cobb schools.

The robotics team is a program lead by mentors from the science and engineering industry with participation from teachers. Barker worked for 30 years as an electrical engineer for a defense contractor named Raytheon.

“You know from thousands of years of history that’s really the way how people learned a lot of things was through mentors,” Barker said. “In the modern era, everybody just kind of sits in a classroom and studies stuff and takes tests and they really don’t get the chance to get their hands on something and actually do it. … We allow the students to take the stuff they’re learning in school, the math and the science and the writing and everything else, and actually apply it to work on real-world problems.”

During the workshop, the team will also be showing off two 150-pound robots that play Frisbee and basketball.

“Each one is about the size of a washing machine,” Barker said. “We have a fleet of about a dozen robots but we’ll only bring about three or four … The bigger robots will be more for demonstration. The little robots will be things people can do. They can build them, program them, drive them around — that sort of thing.

With about 32 students on the team, 15 or 16 will attend the DragonCon workshop, Barker said.

“The mission of our team is to get kids excited and get them fired up about what they’re learning and go off and have a great career,” Barker said. “The robotics thing is a way to hook them in.”

The team program is affiliated with a nonprofit organization called FIRST which emphasizes the STEM careers of science, technology, engineering and math. FIRST stands for For Inspiration and Recognition of Science and Technology. They design programs and lead international science competitions with 300,000 students participating, Barker said.

Former Kell High robotics team captain Alex Epstein graduated from Kell two years ago. Now as a Virginia Tech student, he studies industrial systems engineering and is currently doing research on STEM and engineering education. He considers his robotics education at Kell to be essential in giving him a solid background for his studies at Virginia Tech.

“It was vital,” Epstein said. “I think I already wanted to get into engineering before I got onto the team but it helped to reaffirm that. … So I was already a little bit ahead of some of my peers coming in.”

Read the full story at aulaundry.com web! Shanghai Xunduo Electric & Machinery Co., Ltd. is one of the leading industrial laundry equipment manufacturers of washer extractor, tumble dryer,flat work ironer, laundry dryer, folding machine, dry cleaning machine ect., which is integrating designing,researching, manufacturing, sales and service all within the company to ensure the highest level of quality and service.

Personalisation for the masses

Fabsie is a new platform that could revolutionise the way we design and manufacture furniture. Here is how it works: a designer uploads a CAD file of one of their wooden furniture designs, say a chair; it is reviewed by a team of designers at Fabsie and, if they like it, it’s advertised on their site; when a customer wants to buy the chair, Fabsie will send the CAD file to a CNC (3D cutting) machine workshop near to their home where it is downloaded and the parts cut out of plywood; the customer can then collect the parts (or have it delivered) and assemble the piece of furniture at home.

Customers also have the ability to customize the design, making a bespoke product that won’t cost the earth. Designer and co-founder of Fabise, James McBennett, says, “It really democratizes the bespoke.” So, for example, if you want to buy bookshelves that fit exactly within the parameters of your living room, you can simply email the measurements, which can then be incorporated into the CAD file before it is sent to the CNC machine. As McBennett says, “It is something that all those old industrial manufacturing companies just can’t do.”

He continues, “We’ve had requests from people saying, ‘can we make it taller for somebody who is 6ft 5”’ or, ‘can we make it smaller for our kids,’ by parents who want their children to improve their posture and we can switch those dimensions easily so the stool can fit perfectly in people’s homes.”

McBennett himself has designed Fabsie’s first piece of furniture – a rocking stool made up of three parts, which can be assembled in less than ten seconds. They are looking to raise money for Fabsie by crowdfunding on Kickstarter, where, if you pledge a certain amount, they will send you a stool with your name or company logo carved into it.

What makes this business plan possible is the growing availability of CNC routers. McBennett says, “CNC machines are nothing new but the sharp drop in price for a machine is completely radically new.”

Not only does that mean there will be a rise in the number of CNC workshops but also, in the not too distant future, the customer might own a domestic version of the machine. This way people could download the CAD file and cut their own furniture at home.

CNC, which stands for computer numerical control, is a system that allows for precise, automated cutting and drilling in three dimensions. It is very similar to 3D printing in this way but, unlike the latter which is still at a specialist or hobbyist stage, CNC machines have been used in the manufacturing process since the 1970s. In fact, most people will have come into contact with a product that has been created using one of these machines – if you own an Apple Macbook, for example, the unibody aluminium casing was created using one of these routers.

It is the availability of these machines and the ease with which designs can be personalised with the arrival of a platform such as Fabsie that will transform the way we manufacture. McBennett notes, “Mass production was the innovation of the twentieth century; mass personalisation is the innovation of the twenty-first century.”

Interestingly, McBennett believes that it is 3D cutting and not 3D printing that is going to change the manufacturing landscape. Currently, 3D cutters are way ahead of the printers in terms of what they can do. McBennett says, “It can take a couple of hours to make a small earring on a 3D printer, whereas on a CNC machine you can make a dining room table in a couple of minutes.”